Anodizing Pigments/Dyes

* Key dye features are labeled on the bottle for easy reference, including a color swatch.
* Packaged in a UV protective bottle to ensure a long and stable shelf life of unused dye.
* THIS DYE IS SHIPPED IN POWDER FORM TO INCREASE SHELF LIFE. Standard dry shelf life is 5-10 years. TO ACTIVATE COLOR: Open canister. Fill with distilled water to half an inch (12mm) from the opening of the canister. Close canister tightly. Shake well for 30 seconds. Once activated, use product within 1 year.
* Store in a cool, dry place for longevity. Once activated, this 80 mL / 2.7 oz bottle makes 7.6 liters (or 2 gallons) of anodizing dye bath. This dye has very fast uptake and is stable in saturation.
* Dyes are RoSH compliant and made in the USA. Professional anodizing dye with repeatable consistent colors. Create bright, bold colors on anodized aluminum surfaces.

READ SDS SHEET PRIOR TO HANDLING AVOID INHALATION, INGESTION, EYE AND SKIN CONTACT KEEP OUT OF REACH OF CHILDREN

Rich Pink - Pink E-BL is an anodizing dye. Use Bright Turquoise only on aluminum. It is not intended for use on any other metals or materials.

Rich Pink - Pink E-BL can change its shade depending on the thickness of the anodizing surface and the duration of time in the dye bath. It can be a greyish pink if you do a shorter anodizing cycle. For a longer duration in the anodizing bath and in the dye bath, Rich Pink - Pink E-BL will look like vibrant, bubblegum pink. Make sure to seal with our MT-90 Nickel Acetate sealer directly after dye bath.

Rich Pink - Pink E-BL is RoHS compliant. 

Specs on Rich Pink - Pink E-BL

Concentration: The 80 mL bottle makes 7.6 L (2 gal.) pH - 5.4-6.0 Raise with ammonium hydroxide, lower with acetic acid. Temp: 130-140°F. Light Fastness: 6 (Lightfastness describes how resistant the dye is to fading when exposed to UV light. 1-8, 8 being exceptional and long lasting under UV light.) Time: 4-10 minutes depending on saturation preference. Experiment with your metal and techniques to achieve your desired shade. 
When all procedures are followed carefully, anodizing is environmentally friendly. Anodizing is an electrochemical conversion process. Anodizing changes the outer surface of the aluminum. Anodized aluminum has different characteristics than raw aluminum. Some characteristics of anodized aluminum include durability and weight. (It’s lighter weight than stainless steel but the anodized surface provides a tough surface like steel.) 
The process of “anodization” creates a thick oxide layer. This thick oxide layer makes it hard, quite scratch resistant and improves its corrosion resistance. It is easier to clean than raw aluminum. Because of its porous nature, anodizing makes it possible to dye the aluminum many colors.

* Key dye features are labeled on the bottle for easy reference, including a color swatch.
* Packaged in a UV protective bottle to ensure a long and stable shelf life of unused dye.
* THIS DYE IS SHIPPED IN POWDER FORM TO INCREASE SHELF LIFE. Standard dry shelf life is 5-10 years. TO ACTIVATE COLOR: Open canister. Fill with distilled water to half an inch (12mm) from the opening of the canister. Close canister tightly. Shake well for 30 seconds. Once activated, use product within 1 year.
* Store in a cool, dry place for longevity. Once activated, this 80 mL / 2.7 oz bottle makes 7.6 liters (or 2 gallons) of anodizing dye bath. This dye has very fast uptake and is stable in saturation.
* Dyes are RoSH compliant and made in the USA. Professional anodizing dye with repeatable consistent colors. Create bright, bold colors on anodized aluminum surfaces.

READ SDS SHEET PRIOR TO HANDLING AVOID INHALATION, INGESTION, EYE AND SKIN CONTACT KEEP OUT OF REACH OF CHILDREN
READ SDS SHEET PRIOR TO HANDLING AVOID INHALATION, INGESTION, EYE AND SKIN CONTACT KEEP OUT OF REACH OF CHILDREN
Orange 2B is an anodizing dye. Use Orange 2B only on aluminum. It is not intended for use on any other metals or materials.
Orange 2B can change its shade of orange depending on how long it is in the dye bath. It can be a vibrant tangerine orange if you do a shorter anodizing cycle. For a longer duration in the anodizing bath and in the dye bath, Orange 2B will look like a deep burnt orange.
The anodizing process parameters have a significant impact on the properties of the oxide formed. This means that the color is dependent on the anodizing process.
Orange 2B is RoHS compliant.
Anodizing is an electrochemical conversion process. Anodizing changes the outer surface of the aluminum. Anodized aluminum has different characteristics than raw aluminum. Some of the characteristics of anodized aluminum include durability and weight. (It is lighter weight than stainless steel.)
The process of “anodization” creates a thick oxide layer. This thick oxide layer makes it very hard, quite scratch resistant and improves its corrosion resistance. Also, the thick oxide layer makes it easier to clean than raw aluminum. Because of its porous nature, anodizing makes it possible to dye aluminum many colors.
Anodized aluminum can replace expensive stainless steel in certain applications. Some applications for anodized aluminum are automotive, aerospace, electronics, furnishings, sports equipment, hobby & miniature parts, etc.
Specifications on Orange 2B Concentration: The 80 mL bottle makes 7.6 L (2 gal.) pH - 5.0-6.0 Raise with ammonium hydroxide, lower with acetic acid. Temp: 120-140°F. Light Fastness: 7-8 (Lightfastness describes how resistant the dye is to fading when exposed to light.) Time: 3-10 minutes depending on saturation preference.

* Key dye features are labeled on the bottle for easy reference, including a color swatch.
* Packaged in a UV protective bottle to ensure a long and stable shelf life of unused dye.
* THIS DYE IS SHIPPED IN POWDER FORM TO INCREASE SHELF LIFE. Standard dry shelf life is 5-10 years. TO ACTIVATE COLOR: Open canister. Fill with distilled water to half an inch (12mm) from the opening of the canister. Close canister tightly. Shake well for 30 seconds. Once activated, use product within 1 year.
* Store in a cool, dry place for longevity. Once activated, this 80 mL / 2.7 oz bottle makes 7.6 liters (or 2 gallons) of anodizing dye bath. This dye has very fast uptake and is stable in saturation.
* Dyes are RoSH compliant and made in the USA. Professional anodizing dye with repeatable consistent colors. Create bright, bold colors on anodized aluminum surfaces.

READ SDS SHEET PRIOR TO HANDLING AVOID INHALATION, INGESTION, EYE AND SKIN CONTACT KEEP OUT OF REACH OF CHILDREN

Bright Turquoise - Turquoise E-PLW is an anodizing dye. Use Bright Turquoise only on aluminum. It is not intended for use on any other metals or materials. 

Bright Turquoise - Turquoise E-PLW can change its shade depending on the thickness of the anodizing surface and the duration of time in the dye bath. It can be a pale, silvery turquoise if you do a shorter anodizing cycle. For a longer duration in the anodizing bath and in the dye bath, Bright Turquoise - Turquoise E-PLW will look like a vivid, bright turquoise. Make sure to seal with our MT-90 Nickel Acetate sealer directly after dye bath.

Bright Turquoise - Turquoise E-PLW is RoHS compliant. 

Bright Turquoise - Turquoise E-PLW

Concentration:The 80 mL bottle makes 7.6 L (2 gal.) pH - 5.0-6.0 Raise with ammonium hydroxide, lower with acetic acid. Temp: 120-140°F. Light Fastness: 7 (Lightfastness describes how resistant the dye is to fading when exposed to UV light. 1-8, 8 being exceptional and long lasting under UV light.) Time: 4-10 minutes depending on saturation preference. Experiment with your metal and techniques to achieve your desired shade.
When all procedures are followed carefully, anodizing is environmentally friendly. Anodizing is an electrochemical conversion process. Anodizing changes the outer surface of the aluminum. Anodized aluminum has different characteristics than raw aluminum. Some characteristics of anodized aluminum include durability and weight. (It’s lighter weight than stainless steel but the anodized surface provides a tough surface like steel.) 
The process of “anodization” creates a thick oxide layer. This thick oxide layer makes it very hard, quite scratch resistant and improves its corrosion resistance. It's easier to clean than raw aluminum.

* Key dye features are labeled on the bottle for easy reference, including a color swatch.
* Packaged in a UV protective bottle to ensure a long and stable shelf life of unused dye.
* THIS DYE IS SHIPPED IN POWDER FORM TO INCREASE SHELF LIFE. Standard dry shelf life is 5-10 years. TO ACTIVATE COLOR: Open canister. Fill with distilled water to half an inch (12mm) from the opening of the canister. Close canister tightly. Shake well for 30 seconds. Once activated, use product within 1 year.
* Store in a cool, dry place for longevity. Once activated, this 80 mL / 2.7 oz bottle makes 7.6 liters (or 2 gallons) of anodizing dye bath. This dye has very fast uptake and is stable in saturation.
* Dyes are RoSH compliant and made in the USA. Professional anodizing dye with repeatable consistent colors. Create bright, bold colors on anodized aluminum surfaces.

READ SDS SHEET PRIOR TO HANDLING AVOID INHALATION, INGESTION, EYE AND SKIN CONTACT KEEP OUT OF REACH OF CHILDREN
Bronze Age is an anodizing pigment dye. Use Bronze Age only on aluminum. It is not intended for use on any other metals or materials. Bronze Age can change its shade depending on how long it is in the dye bath. It can be a light bronze if you do a shorter anodizing cycle. For a longer duration in the anodizing bath and in the dye bath, Bronze Age will look like a dark rich bronze orange. The anodizing process parameters have a significant impact on the properties of the oxide formed. This means that the color is dependent on the anodizing process.
Bronze Age is RoHS compliant.
Anodizing is an electrochemical conversion process. Anodizing changes the outer surface of the aluminum. Anodized aluminum has different characteristics than raw aluminum. Some of the characteristics of anodized aluminum include durability and weight. (It is lighter weight than stainless steel.) The process of “anodization” creates a thick oxide layer. This thick oxide layer makes it very hard, quite scratch resistant and improves its corrosion resistance. Also, the thick oxide layer makes it easier to clean than raw aluminum. Because of its porous nature, anodizing makes it possible to dye aluminum many colors. Anodized aluminum can replace expensive stainless steel in certain applications. Some applications for anodized aluminum are automotive, aerospace, electronics, furnishings, sports equipment, hobby & miniature parts, etc.
Specifications on Bronze Age Concentration: The 80 mL bottle of powder concentrate makes 7.6 L (2 gal.) pH - 5.0-6.0 Raise with ammonium hydroxide, lower with acetic acid. Temp: 110-140°F. Light Fastness: 6 (Lightfastness describes how resistant the dye is to fading when exposed to light.) Time: 3-10 minutes depending on saturation preference.